Roof Vent Pipe Flashing, Plumbing Vent Pipe Flanges/Flashings for Roofs - F.J. Moore Manufacturing, Cannon Falls, MN Frost-Resistant Plumbing Vent Pipe Flanges/Flashings for Roofs
 Frost Resistant
Plumbing Vent Pipe Flanges
Patented cover-all design
- unique in the industry!
With Over 90 Years of experience
Why settle for less when you can get MOORE!
Home Product Catalog Copper Vent Pipe Flanges/Flashings Colors Custom Vent Pipe Flanges/Flashings Install Instructions Resources Company Information Frequently Asked Questions Contact Us

Proper Installation of F. J. Moore Roof Caps

Instructions for installing a plumbing roof vent pipe flange/flashing on a roof.
 
1. Cut vent pipe 1 1/2" - 5" above top of base sleeve to allow for roof movement (Expansion and Contraction).  
2. Lay the Flange on the roof beside the vent pipe. To adjust the exact pitch, use the  hip corners to increase or decrease the pitch.
3. Place the flange over the pipe and rotate under one row of shingles.
4. Center the pipe so there is approximately 1" of air space around perimeter.
5. Install the top sleeve and tighten the ring (Nut / Bolt ).
6. Nail the Base flashing to the roof clamp
F. J. Moore Manufacturing Company 500 Washington Street West Cannon Falls, Minnesota 55009
Phone: 1-800-658-2331 Fax: 1-507-263-4439 Site Map